Arc chasse démontable

• Laminated hard rock maple handle that shows attractive wood grains
• Comfortable grip designed for a good hand position
• ILF system for a wide variety of limbs
• 19" riser

• Carbon backed riser for added strength.
• Laminated hard rock maple handle that shows attractive wood grains.
• Comfortable grip designed for a good hand position.
• ILF system for a wide variety of limbs.
• 17", 19", 21" & 23" riser options to make your chosen bow configuration.

• Small (62")  brace height : 7 1/2"~ 8 1/4"
• Medium( 64") brace height : 7 1/2"~ 8 1/4"
• Long(66") brace height : 7 1/2"~ 8 1/4"

The 21 inch Bryon hunting riser from Oak Ridge is a CNC machined extrusion riser with an ILF (International Limb Fitting) pocket allowing for a vast range of possible limb options. Complete with a modern limb alignment system and an attractive wooden grip, the Bryon weighs in at 1125g and is available in a range of anodized matt colours. - Length: 21" - Weight: 1125gr - Fitting: ILF - Features: Machined extrusion riser, with limb alignment system, wooden grip, anodized or dipped matt colours

- Length: 19" - Weight: 795g - Wood: Dymond Wood - Fitting: ILF - Features: Limb alignment system

RISER 19": with limbs: SH 60" - MD 62" - LG 64" 

19" riser, results in the following bow lengths:

• SH limbs = 60"
• MD limbs = 62"
• LG limbs = 64"

17" riser, results in the following bow lengths:

• SH limbs = 58"
• MD limbs = 60"
• LG limbs = 62"

Branches en érable et fibre noire. Selon la combinaison avec la poignée choisie la longueur totale de l'arc est de:

POIGNEE 17": avec branches: SH 58" - MD 60" - LG 62"

POIGNEE 19": avec branches: SH 60" - MD 62" - LG 64"

Take Down bow in 62" in finest European handmade. In contrast to the Atlas Black, the Atlas Brown is made of classic woods. A timeless combination of Amazoque and Merbau separated by a dividing strip and additional Micarta inlay for more stability and weight. Limbs made of Amazoque covered with clear glass result in a harmonious classic colour combination. The bow lies well in the hand, is fast and forgiving. Micarta tips make the bow suitable for Fast Fligth. Ideal price-performance ratio.

62" suitable for draw lengths up to a maximum of 29-30".

Supplied in a beautiful dark brown take down bag including string. 

Take Down bows in 62" and 64" in finest European handmade. Riser made of Teknowood in a combination of 3 layers of Teknowood in dark grey and black combined with brown dividing strip and additional Micarta inlays for more stability and weight. The colours are timelessly beautiful and modern. The bow lies well in the hand, is fast and forgiving. Limbs with wooden core and black glass inlays. Tips in Micarta make the bow suitable for Fast Fligth. Ideal price-performance ratio.

62" ideal for draw lengths up to 29" and 64" up to 31".

Supplied in a beautiful dark brown take down bag including string. 

Branches en bois et fibre de verre noir, utilisable sur tous les - maintenant nombreuses - poignées de chasse avec attache ILF. Optimisé pour poignée de chasse.

La puissance des branches a été calculée avec la poignée 25''.

Poignée 17 "+ branches longues = 62"
Poignée 17 "+  branches moyenne = 60"

L'arc Take Down TDX 210 de 64" est un produit fabriqué avec soin en Europe. Sa ligne est celle des arcs Tuscany Spirit, avec la meme géométrie, mais à un prix plus competitif. La poignée est composée de Palissandre, Paduk et Amazoque divisés entre eux avec deux bandes de micarta noir de 2 mm. Le micarta augmente la stabilité et le poids. Les branches, qui ont la géométrie du Tuscany, sont fabriqués en bambou. L'un des principaux avantages de ce modèle est la fluidité de la traction, du à la géométrie du Tuscany. Très appréciable l'absence presque totale de vibrations et la vitesse qu'il peut obtenir. Le modèle TDX 210 est idéal pour les alonge jusq'à 31 pouces.

Tips en micarta pour l'utilisation de corde Fast flight.

L'arc Take Down TDX 190 de 62" est un produit fabriqué avec soin en Europe. Sa ligne est celle des arcs Tuscany Spirit, avec la meme géométrie, mais à un pirx plus competitif. La poignée est composée de Palissandre, Paduk et Amazoque divisés entre eux avec deux bandes de micarta noir de 2 mm. Le micarta augmente la stabilité et le poids. Les branches, qui ont la géométrie du Tuscany, sont fabriqués en bambou. L'un des principaux avantages de ce modèle est la fluidité de la traction, du à la géométrie du Tuscany. Très appréciable l'absence presque totale de vibrations et la vitesse qu'il peut obtenir. Le modèle TDX 190 est idéal pour les alonge jusq'à 29 pouces.

Tips en micarta pour l'utilisation de corde Fast flight.

Edge Takedown is a bow made with great attention to details.

The limb sockets' retainers have been rounded evenly, the obtrusive tool-less bolts have been replaced with flush keyed bolts, and the riser as a whole has been smoothed and rounded for a sleeker form.

These subtle improvements are topped off with a red accent running through the core and a finer finish than the alternative.

The bow can be shot either off the shelf with a rug rest & strike plate, or off an optional elevated rest.

Beautiful and cleanly crafted riser made of solid wood with red trim. This riser with traditional screw cap for the combination with the Spark limbs lies well in the hand and is stable.

Available in 17" and 19" length.  

Limb Spark for combination with the Spark riser. Limb with traditional screw connection with core made of wood covered with black glass.  

ILF Take Down bow, built up with a 19" or 21" riser and medium limbs to achieve a total length of 62" or 64" respectively. Complete with a D97 string, stringer and rug rest with plastic halfmoon backing. The riser features threaded holes that allow to apply the cushion plunger (or the support for the rug arrowrest), stabilizer, sight and bow quiver.

It is reccomended to follow the instruction manual suplied with the bow. The same manual is also available for download.

Belle et élégante poignée de chasse, en aluminium fraisé d'un bloque solide. 17" de long, elle est équipé d'un système de fixation type ILF, avec des vis tiller pour régler la puissance et d'un système de réglage latéral des branches. La Mercury est fourni avec un repose-flèche en cuir prréinstallé.

La finition de la surface est très bonne, avec l'anodisation dans trois couleurs différentes: noir (BK), gris titane (GY) ou vert (GR). La poignée idéale pour cheux qui recherchent un bel arc de chasse technique.

Disponible en versions RH et LH. 

Traditional riser with ILF system made of Zebrawood and black Micarta with red interspace. The ILF system is suitable for all ILF limbs available on the market. By the Tiller screw the Tiller is adjusted and the weigth (+/- 3 pounds). The riser is also equipped with the alignment of the limbs. The combination with Micarta increases the weigth of the riser which also damps most of the vibrations.

Available in 17" and 19".

With the 17" riser and short limbs the total length of the bow is 58", with medium limbs is 60" and with long limbs is 62".

With the 19" riser and short limbs the total length of the bow is 60", with medium limbs is 62" and with long limbs is 64".

Weight:

Riser 17" approx. 700 grams

Riser 19" approx. 800 grams

Take Down riser in 3 different versions and 2 different lengths 17" and 19" available. The Gecko riser are slightly deflex and have a handle that fits very well in the hand. The design is modern and results in beautiful chromatic colour combinations. Combined with the Gecko limbs, the 17" riser results in a bow length of 60" and the 19" riser results in a bow length of 62". Limb and riser can be combined with each other as desired.

• Version EBONY. A beautiful wavy strip of Teknowood ebony in the middle combined with two half moons of beautiful Zebrano - very elegant.
• Version TWO TONE. A half moon of rosewood on the inside and a half moon of zebrawood on the outside separated by white stripes - classic design.
• Version TECHNO. A beautiful wavy zebrawood stripe in the middle combined with 2 half moons in modern teknowood - very modern.  

Beautiful hunting riser in 17 inch, weighing just under 800 grams, made of stabilised wood and equipped with ILF receiver system. Due to the stabilised wood, this riser can be easily cut over the middle and thus has a good centre shot, it is also torsionally stiff and thus helps to achieve a quiet shooting behaviour. The black neutral colour matches many combinations of limbs. A riser with optimal price-performance ratio.

Provided with tiller and pound adjustment, no alignment of the limbs.  

Poignée avec système ILF construit en multicouche spécial de moyenne densité.

Belle couleur en marron-rouge-noir. Bien que la longueur ne dépasse pas 19" la poignée atteint presque 1.100g, elle est très rigide et permet donc un tir tranquille. Le système ILF permet de choisir une large gamme de branches. Egalement équipé de réglage latéra des branches par axe fileté.

Une poignée idéale pour tous les archers qui recherchent une poignée tranquille et flexible à un budget contenu.

Longueur 19". 

NB: Il est recommandé d'effectuer les réglages sur l'alignement des branches avec précaution. La poignée étant en bois, un effort excessif sur le pocket peut entrainer sa rupture. 

Les Branches GECKO sont fabriqués en Corée avec du bois et de la fibre de verre. La courbe de flexion particulière aide à obtenir une meilleure vitesse de sortie et une meilleure stabilité de la branche.

Longueur MEDIUM

Aussi pour Fast Flight

Les Branches GECKO sont fabriqués en Corée avec du bois et de la fibre de verre noire. La courbe de flexion particulière aide à obtenir une meileure vitesse de sortie et une meilleure stabilité de la branche.

Longueur MEDIUM

Aussi pour Fast Flight

60" take down bow with a slim Actionwood riser in red or grey. Limbs are made with a wooden core and black fiberglass. A good bow at a small price.

Available in RH or LH.

Complete of fast flight string.

60" take down bow with a slim Actionwood riser in red or grey. Limbs are made with a wooden core and black fiberglass and with an Hybrid shape. A good bow at a small price.

Available in RH or LH.

Complete of fast flight string.

L'arc est complet de corde

Traditional aluminium bow. Affordable and perfect for the first competitions.
Wooden grip and ILF system, easy limbs adjustment 

Take Down in a special shape of its own. Inspired by a well-known American brand, the limbs are fixed to the back of the riser. The Black Mamba has a deflex riser and relatively straight limbs. A 62 inch take down in a completely black timeless design. Centre section in black Teknowood and limbs in bamboo covered with black glass. Modern design and very good throwing performance.

Supplied with Dacron string. 

First introduced by Fred Bear more than 50 years ago, the Bear Take Down was a modern and innovative design that revolutionized the archery industry. Available in both an A and B length riser, this iconic bow features the signature 1969 heal horn style grip to allow for a deep feel and consistent grip. The 2022 Take Down is available in two timeless wood finishes: Black Maple with a phenolic black stripe or Bubinga and phenolic with an inlaid phenolic black stripe. An A-Riser with #1 limbs = 56” AMO // A-Riser with #2 limbs = 58” AMO // A-Riser with #3 limbs = 60” AMO. The B-Riser with #1 limbs = 60” AMO // B-Riser with #2 limbs = 62” AMO // B-Riser with #3 limbs = 64” AMO

A-HANDLE
The A riser can be paired with #1, #2, or #3 Bear limbs to make a 56", 58” or 60" bow
B-HANDLE
The B riser can be paired with #1, #2, or #3 Bear limbs to make a 60", 62” or 64" bow
CLASSIC DESIGN
Heal horn style grip allows for a deep feel and consistent grip
PREMIUM PERFORMANCE
Arrow shelf is 1/8" above the grip for a closer arrow to hand trajectory and consistent arrow flight 

Heal horn style grip allow for a deep feel and consistent grip.
Arrow shelf is 1/8" above the grip for a closer arrow to hand trajectory and consistent arrow flight.

Bubinga and black phenolic.

The A riser can be paired with limbs to make a 56" or 60" long bow.
The B riser can be paired with limbs to make a 60" or 64" long bow.

Branches extrêmement performantes, avec couche interne et externe en fibre de verre noire de haut de gamme. Poupées fabriquées à la main en stratification Dymondwood® rouge et fibre de verre noire.

• 2nd generation of ultimate in performance, accuracy & versatility
• 17” Titan II has two unique broadhead chamfer cutouts
• Accepts all ILF recurve & longbow limbs for a 58”, 60” or 62” bow
• CNC machined of solid billet 6061 T6 aircraft aluminum
• Enclosed limb pockets with even more structural rigidity
• 1 to 10% weight adjustablity up from base weight
• Easy tiller adjustment for split or three fingers under
• 8-32 lateral limb adjustment allow perfection with any ILF limb
• ATA threaded holes for bow quiver, sight, stabilizer, plunger, etc.
• MAS mass adjust system option for adding weights in logo hole
• 2nd 5/16”-24 plunger/rest mount hole for wrap around rests
• Smooth radius under grip for shooting “super skinny” on riser
• PWS - pocket weight system option - can add up to 2 oz. of mass weight in each limb pocket to customize balance point
• Modular shelf radius(MSR) system option - bolts into plunger hole forming a narrow, low shelf radius and true center shot

Choose from RH or LH model in stealth matte black
Medium custom walnut grip

The perfect partner for the Sanlida Blackstone huting riser. These high perfromance International Fitting Limbs (ILF) are constructed from high strength cross carbon material providing for a smooth, light weight and fast limbs. Featuring the latest in limb design with a slim shape. Available in 60in or 62in lengths (19H) between 25-60lbs. - Fitting: ILF - Material: High-strength cross carbon - Smooth, light weight & fast limb - Advanced design, slim shape, durable, high performance, high speed , high precision & low vibration

The Sanlida Blackstone hunting recurve riser is produced from CNC forged aluminium to the highest standards. This 19 inch riser features a limb alignment system and accepts all International Fitting Limbs (ILF) and is supplied as standard with a wooden grip. - Length: 19" - Fitting: ILF - Finish: Groove anodize - Limb alignment system - CNC aluminium riser for ultimate performance and appeal - Medium wooden grip

The perfect bow for recreational archers and hunters alike, the 58 inch Sanlida Osprey offers strength and style in one streamlined package.Whether you are looking for a bow for target archery or a great bowhunting bow, the Osprey Recurve is a great option.Three piece take-down design for easy storage.Durable one-piece magnesium riser. Flemish D97 string included. - Bow length: 58" - Draw weight: 20-50lbs (increasing by 5lbs) - Riser material: Magnesium - Wood core limbs - Riser colours: Black or Camo - Limbs colour: Black - String included - RH model only

- Fitting: ILF - Features: Fiber/Wood - Smooth, light weight and fast limb - Advanced design, slim shape, durable, high perfomance - Design of limb tips make the initial speed faster