outillages et mise au point

Peson d'arc électronique X-SPOT Digital Bow Scale à suspendre.
Très précis, il permet de mesurer la force de tous types d'arcs, recurves ou compound, avec une tolérance de +/- 0.5 lbs.

Caractéristiques :

- Fonction conversion en livres, onces et grammes.
- Capacité maximum : 100 lbs.
- Fonction arrêt automatique.
- Fonctionne avec deux piles AAA (livrées).

Release Aid Trainer & Checker Firing-Line™ is the ultimate training tool for archers. So compact, it stows in a brief case…perfect for practicing anywhere, anytime. With quick draw-length adjustment, its great for warming up, tuning a release or muscles. Even better, it can overcome everyone’s nemesis…target panic. Never worry about throwing an arrow…just aim and practice the perfect release, time-after-time. With each smooth and quiet shot you burn-in muscle memory so when its the real thing, you burn the x-ring or the kill zone. Adjusts from 32 3/8 inch to 24 inch draw length. The optional three pound weight set gives you the feel of your bow. Firing-Line…The place to practice.

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).Not only – and much more important! – it allows to „compact“ the serving.

The Beiter Distance Holder is a tool to separate string and cable of a Compound Bow, to allow or simplify specific works to be done, such as re-serving a string or cable or to fix a nocking point or peep sight...The biggest advantages toward similar products are, that on one hand it is smaller and on the other hand the cable guard is not an obstacle, but is eventually part of the use. - inserted in the cable-guard, if you have to serve in the area of the cable-guard itself. - with 2 or 3 installed DH-Plugs, Plugs for Distance Holder, you can use the Beiter Distance Holder directly between string and cables: the plugs will than be a sort of rolls to better slide on the cables!! - with 4 installed DH-Plugs, 2 per each side, for shoot-through cable systems.

The Beiter Tri-Liner is used to mark the exact position of vanes (like e.g. Spin Wings™, Kurly Vanes™, Rite Flite Vanes™, ...) on arrow shafts up to 7,2mm (9/32") Nock-out-diameter.With the Beiter Tri-Liner it is easily possible to adjust the position of fletching in relation to the string, as well as the distance to the end of the shaft. The Tri-Liner ist can be used for different Vane lengths, for Lefthand or Righthand archers, as well as for Recurve or Compound archers. In fact the positioning ring allows many different adjustements and an exact orientation of nock and fletching. The included red Tabs are for the exact positioning of the fletching in length and distance to the nock. Additionally they help to draw the line in the correct length.You may clean the tool also with Acetone if desired.Please refer to our Instructions Guide to know how to use the Beiter Tri-Liner and achieve best results with it.

Multi Flex is more than a tool. Is the indispensable tool. It´s more than a fistmele and tiller gauge. MultiFlex is a sturdy tool that can be use like wrench for most of actual nocks, a wrench for 2, 3 or 4 blades broadheads and safely install them. Archers found that the three blades wrench can be used for check the correct fletching of arrows with three vanes. More : MultiFlex extreme is a useful tool for operate with peep on the string, and comes with cm (installed) and inches. A point where we focus a lot effort is clipping the string. Our MultiFlex is the most friendly of all existing tools.The special plastic used on the well known Flex-Lebrunet armguard, with a combination of strength and flexibility and rounded corners will not damage your string or serving. MultiFlex is made with a very resist plastic - fibre reinforced with a specific combination of hardness and lightness.

• Install brass nocks without damaging the string
• Suitable for all sizes of nock
• Rubber coated handles for a secure and comfortable grip
• Available as 10 units

Équerre Cartel CR-608 T-Gauge en aluminium anodisé. Permet de mesurer le band de l'arc et régler le point d'encochage.

Caractéristiques :

- Graduations métriques et inches.
- Attention, les couleurs peuvent varier selon arrivages.

• Essential tuning tool for any archer
• Effectively and accurately measure bracing height and nocking point
• Durable anodized aluminium design
• Wear resistant, engraved scale
• Colour may vary from that pictured