Mètres en pouces et centimètres. Outil indispensable pour tous les archers.
Presse professionnelle utilisable avec tout arc compound.
Support/adapteur spécial pour les arcs composés avec des branches très courbées (ex. Hyperedge, Carbon Defiant, etc.), évite que l'arc glisse lors de la fermeture de la presse. Accessoires recommandé pour la presse 53A903
When wooden arrows get damaged or crack you can try to fix them cutting the cracked end with a diagonal cut and then adding a piece of shaft previously cut with the same angle. To glue the two part together you need the clamp to keep them together while the glue get hard.
The clamp is available for both 5/16" or 11/32" shafts.
Outil pratique qui facilite l’assemblage des pointes à vis sur les flèches en bois.
With the Beiter String-Tool you can easily count the strands in your string and properly install your Peep-Sight.After you have pushed the first String-Tool through the string, you can count the single strands by inserting them into the grooves on the Tool.To be able to install the Peep-Sight easier, you can use the second Beiter String-Tool generating a bigger working-window. - split a string for Peep-Sight installation - easily count the number of strands of your string - determine the middle of the string by counting the strands so ensuring that the Peep-Sight is in the center of your string - you can start a serving extremely simply and quickly - use the String-Tool as a lever to ease off a rest or glue from your bow!
The Beiter Limb Tip Line Gauges help to determine limb straightness and torsion. The Beiter Limb Tip Line Gauges must be placed between the string and the limbs: this avoids the string to be retained in the string groove and shows if the limb alignment is good.
The Beiter Rip-Clutch is a new Bow-Holder or Bow-Vise, for shops, clubs or archers.It is part of a new product line that Werner Beiter has developed to simplify the work for the archers.The Beiter "Rip-Clutch Square with Adapter 5/16"-24" and the Beiter "Rip-Clutch Round with Adapter 5/16"-24 IN" can among others be used:in a Club-House beginner-bows can be stored in an optimal way!in an archery shop, to display bows. The position of the bows can be changed easily, giving always a professional and good looking view to the customer. Not only: whenever one bow is sold, you take it off the Rip-Clutch, leaving the Adapter on the bow, and slip it on to a Multi-Tool or another Rip-Clutch fixed on the counter or your work-bench or workshop, so you can install all components fast and with both your hands free to work no matter if you want to install a Pee a Rest, a Plunger, a Clicker, a Sight you will have two free hands!
Features:
The Universal Nocking Plier opens nock sets without damage, two hole size for nock set installation, pre-stretches D-loop, permanently tightens D-loop to string, heavy duty comfortable extra large grip.
The Taper Tool made of plastic is the world's most widely used tool to attach the cone for tip and nock to wooden arrows. Absolutely simple and reliable in its handling, it convinces archers in their daily use.
Precious Ground: Each clamp is precision ground to assure identical blade matching. - True Helical Fletch: The Right and Left helical clamps are ground with a radius to achieve a true helical fletch. - Hollow Recess: The hollow recess allows for thumb and fingertip control which provides for a tighter grip and more precise finished product. - Graduated Scale: The Graduate Scale at the rear of the base of the clamp allows for consistent and accurate spacing of the feathers and vanes from the nock. - Knife Edge: The knife edge on located on the base of the clamps eliminates build up of surplus glue and provides a clean and professional final product. (No messy arrows!)
Peson électronique Axess Digital Scale avec prise en main facile.
Caractéristiques :
- Convient pour arcs classiques et compound.
- Permet de faire une mesure très précise en livres ou en kilos.
- Livré avec piles.
The Ultimate EZ Deluxe is designed for quick and easy set-up of most compound bows and crossbows. This press is perfect for both home and shop use and it’s very simple to use. Each LCA press model is equipped with the LCA patented finger system that allows you to press your bow exactly as if it's being drawn back. Which means while pressing your bow you're not applying any extra pressure to your limbs and you're also not applying torque to your riser. The Ultimate EZ Deluxe moves in and out using a manual handwheel for fast and smooth movement. This particular press model has a range that spans from 11” - 54” axle to axle length. Ultimate EZ units are built using a much thicker grade material so that the press itself is strong enough to handle the very high poundage crossbows.
Designed with the individual consumer in mind, the EZ Green bow press is built and designed for pressing most compound bows on the market today. This press is perfect for both home and shop use and it’s very easy to use. Each LCA press model is equipped with the LCA patented finger system that allows you to press your bow exactly as if it's being drawn back. Which means while pressing your bow you're not applying any extra pressure to your limbs and you're also not applying torque to yourbe bench top. This particular press model has a range that spans from 25” - 48” axle to axle length.
Universal portable bow press from Avalon.
For Perfect 90 Degrees nock Position - Checks vertical and horizontal position of bow for easy nock and sight installation.
- Powerful 3MW red Laser - No tools required for adjustments or mounting - Provides reference for cam, arrow rest and center shot alignment - Contains a built in level which can be leveled for both RH and LH risers
Electronic scale with clip. Illuminated monitor with weight display adjustable in kg or lbs (max. 80 lbs).
Un outil indispensable pour affiner le vol des flèches, désormais disponible dans une mallette en bois pratique, avec les éléments suivants :
Permet la réalisation d’une façon très pratique et précise un cône soit pour la pointe soit pour l’encoche et ceci pour les 3 tailles de fûts existants : 5/16, 11/32 et 23/64.
• Convenient and versatile archery tool
• Patent-pending dual-jaw design
• Maximizes mechanical advantage for tightest possible D-loops
• Six tools in one
Instructions for tying a D-Loop rope:
Step 1. Tie and burn the first half of the loop, grip the tag end of the D-Loop cord in the specially designed separated jaw. This jaw will grip the cord tightly without damaging the cord unlike conventional pliers.
Step 2. While maintaining a grip on the cord, wrap the D-Loop cord around the bottom jaw, then up and around the vertical leverage cleat. Then simply pull away from the bow to tighten the first knot.
Step 3. Size and tie the loop, then burn the second knot. The final stretch is performed by placing the side jaw between the serving and the D-Loop cord. Squeeze the handles as needed to separate the jaw and stretch the cord. Once tightened, the D-Loop cannot easily be adjusted, so be careful not to over-tighten the cord.
Un outil indispensable pour les amateurs de mise au point. Fabriqué avec des matériaux de haute qualité pour une performance des plus remarquable au fil du temps.
Great tool for clearing paint and repairing threads on inserts, sights, rest, quivers, stabilizers and more.
reat tool for clearing paint and repairing threads on inserts, sights, rest, quivers, stabilizers and more.
Great tool for clearing paint and repairing threads on inserts, sights, rest, quivers, stabilizers and more.
The Bearpaw Fletching Tool Deluxe is considered the most accurate in the world of archery. The developers of Bearpaw Products were able to combine the experience of Henry Bodnik and the needs of archers. Many individual adjustment options ensure the best and most accurate fletching of your arrows. The basic construction of this functional unit is made of a heavy metal, in order to guarantee both quality and durability. Together with the available base plate, you can easily expand your fletching tool. - can switch easily from 3- to 4- or 6-fold fletching - precision holder for thinner and thicker arrow shafts - centering of the nock - individual fine tuning for perfect fit of the fletch or feather
https://www.ssa-archery.com/fr-be/variantlist/fletching-jig-deluxe-fletching-tool-straight-clamp-a027076?returnurl=%2ffr-be%2fvariantlist%2f%3fmainproid%3da032534%26returnurl%3d%252ffr-be%252fsearch%253fq%253dbearpaw%2526count%253d36#:~:text=SP%C3%89CIFICATIONS-,The%20Bearpaw%20Fletching%20Tool%20Deluxe%20is%20considered%20the%20most%20accurate%20in,individual%20fine%20tuning%20for%20perfect%20fit%20of%20the%20fletch%20or%20feather,-PRODUITS%20ASSOCI%C3%89S
Makes the d-loop a consistent length each time - Applies 400lbs of pressure equally on each knot - D-Loop will not slip or turn - Spring that will keep the tool open.
High capacity, high accuracy digital arrow scale. Features an exclusive arrow and accessory holder that holds arrows and points in place. Conveniently weighs in grains only, 3086 grain max x 0.2 grain accuracy. - High Capacity, high accuracy digital scale - Arrow retainer included - Weighs in grains - 3086 grain max x 0.2 grain accuracy
Peson d'arc électronique X-SPOT Digital Bow Scale à suspendre.
Très précis, il permet de mesurer la force de tous types d'arcs, recurves ou compound, avec une tolérance de +/- 0.5 lbs.
Caractéristiques :
- Fonction conversion en livres, onces et grammes.
- Capacité maximum : 100 lbs.
- Fonction arrêt automatique.
- Fonctionne avec deux piles AAA (livrées).
Release Aid Trainer & Checker Firing-Line™ is the ultimate training tool for archers. So compact, it stows in a brief case…perfect for practicing anywhere, anytime. With quick draw-length adjustment, its great for warming up, tuning a release or muscles. Even better, it can overcome everyone’s nemesis…target panic. Never worry about throwing an arrow…just aim and practice the perfect release, time-after-time. With each smooth and quiet shot you burn-in muscle memory so when its the real thing, you burn the x-ring or the kill zone. Adjusts from 32 3/8 inch to 24 inch draw length. The optional three pound weight set gives you the feel of your bow. Firing-Line…The place to practice.
The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).Not only – and much more important! – it allows to „compact“ the serving.
The Beiter Distance Holder is a tool to separate string and cable of a Compound Bow, to allow or simplify specific works to be done, such as re-serving a string or cable or to fix a nocking point or peep sight...The biggest advantages toward similar products are, that on one hand it is smaller and on the other hand the cable guard is not an obstacle, but is eventually part of the use. - inserted in the cable-guard, if you have to serve in the area of the cable-guard itself. - with 2 or 3 installed DH-Plugs, Plugs for Distance Holder, you can use the Beiter Distance Holder directly between string and cables: the plugs will than be a sort of rolls to better slide on the cables!! - with 4 installed DH-Plugs, 2 per each side, for shoot-through cable systems.
The Beiter Tri-Liner is used to mark the exact position of vanes (like e.g. Spin Wings™, Kurly Vanes™, Rite Flite Vanes™, ...) on arrow shafts up to 7,2mm (9/32") Nock-out-diameter.With the Beiter Tri-Liner it is easily possible to adjust the position of fletching in relation to the string, as well as the distance to the end of the shaft. The Tri-Liner ist can be used for different Vane lengths, for Lefthand or Righthand archers, as well as for Recurve or Compound archers. In fact the positioning ring allows many different adjustements and an exact orientation of nock and fletching. The included red Tabs are for the exact positioning of the fletching in length and distance to the nock. Additionally they help to draw the line in the correct length.You may clean the tool also with Acetone if desired.Please refer to our Instructions Guide to know how to use the Beiter Tri-Liner and achieve best results with it.
Multi Flex is more than a tool. Is the indispensable tool. It´s more than a fistmele and tiller gauge. MultiFlex is a sturdy tool that can be use like wrench for most of actual nocks, a wrench for 2, 3 or 4 blades broadheads and safely install them. Archers found that the three blades wrench can be used for check the correct fletching of arrows with three vanes. More : MultiFlex extreme is a useful tool for operate with peep on the string, and comes with cm (installed) and inches. A point where we focus a lot effort is clipping the string. Our MultiFlex is the most friendly of all existing tools.The special plastic used on the well known Flex-Lebrunet armguard, with a combination of strength and flexibility and rounded corners will not damage your string or serving. MultiFlex is made with a very resist plastic - fibre reinforced with a specific combination of hardness and lightness.
Équerre Cartel CR-608 T-Gauge en aluminium anodisé. Permet de mesurer le band de l'arc et régler le point d'encochage.
Caractéristiques :
- Graduations métriques et inches.
- Attention, les couleurs peuvent varier selon arrivages.
- Comfortable gripping handle for easy use - Easily makes any size D-loops - Stretches D-loop so it does not move on you - 3 notches to perfectly make a D-loop every time
Metric and inch markings - Metal string clips - Perfect tool for nockset placement, brace and tiller checking. lazer engraving - T-shape
Basic archery tuning kit for recurves. - One Avalon Tyro stick-on arrow rest - One brace height gauge - One Avalon Annex nockset plier - Two nocksets
Why fletch 1 arrow if you can fletch 6 at the same time? This awesome fletching jig will save you a lot of time on fletching and gain you time for shooting at the range! Easy to adjust for optimal fletching contact thanks to our adjustable jig and clamps. Choose between 3 or 4 fletched arrows all with the same nock receiver (just flip it in the jig and you are ready to go). - Durable metal frame design - Ultra-compact size for 6 arrows - Chromium- plated clamp - Easy to adjust
Fletch three vanes or feathers at once with Bohning's Tower® Jig! This revolutionary fletching jig provides exceptional adhesion force that is evenly distributed along the base of the vane or feather. You will get consistent angles and perfect 120° spacing. The durable, engineering-grade composite material can be cleaned with acetone to remove adhesive residue. The Tower® Jig is great for single vane repairs too! Available in multiple configurations (see reference chart) for different arrow sizes and fletching angles, from straight fletch up to a 3° right or left helical. All configurations include a base, three sizes of pressure rings to accommodate all arrow diameters, a set of 3 Spacer Plates for an extra .025" (6mm) of space between the nock and vane, and Clamp Release Tape.
The Big Jig's unique clamp system provides more adhesion force than standard fletching jigs and it is large enough to accommodate fletchings up to 4" (101.6mm) long. It includes two clamps to fletch either a 3° Right Helical (black) or a 1° Right offset (red). It accommodates standard shafts from .293 - .306" (7.4 - 7.8mm) OD and is capable of 3 or 4 fletch (4 at 90° or at 60° x 120°). The installed nock receiver on the Big Jig accommodates standard nocks. Nock receiver for crossbow bolts also included.
The Pro Class Jig has a quick-set magnetic clamp with large grips for easy operation. It fits all shaft sizes and features an adjustable offset on vanes or feathers up to 5.5" (140mm) long. It is capable of 3 or 4 fletch (4 at 90°). The Pro Class Jig is available in three configurations - with a Straight Clamp, a Right Clamp, or a Left Clamp. Additional clamps available for purchase separately.
Bohning's Multi-Fletcher® Jig will truly do it all! Every Multi-Fletcher® includes 7 color-coded clamp inserts for different angles, from straight up to a 3° right or left helical. It works with all arrow diameters from X10s to 27s. The Multi-Fletcher® can do a 3 or 4 fletch and will accommodate arrows with standard nocks or x-bow bolts. The rugged 16-gauge stainless steel base and durable composite clamps can be cleaned with acetone to remove adhesive residue. The unique snap-lock clamp plate with inserts provide superior adhesion force and consistent angles, and the feather inserts are specially designed to avoid damage to feathers. Certified Crossbow Compatible.
Very clear and precise bow square from Avalon.
Wooden shaft taper tool. It has two blades with different angles: one for the nock adapter and one for the point end.
Both blades can be used to taper shafts with 5/16" or 11/32" diameter, simply switching the screw on adapter.
Aluminum body, stainless steel blades.
Balance éléctronique multi-fonction Digital CD Scale. De grande précision cette balance vous permettra de vérifier la tolérance de masse de vos flèches et de leurs composants.
Caractéristiques :
- Permet une conversion en grammes, grains et onces.
- Livrée avec piles dans un boîtier de protection type CD.
Pince à redresser les flèches Cartel Arrow Straightener : Indispensable pour donner une nouvelle vie à vos fûts en aluminium !
Empenneuse Spigarelli Spiga Marker 120°X3. Permet le montage des plumes Spin-Wing, XS Wings, Eli Vanes, Gas Pro mais aussi des plumes naturelles avec adhésif double face.
Caractéristiques :
- Le tube est maintenu dans le cylindre par des vis en téflon permettant de tracer l'emplacement de l'adhésif avec précision.
- Cette empenneuse accepte tous les diamètres de tubes du X10 jusqu'au 23/64.
If they don't spin right, they won't fly right! The Arrow InspectorTM is a precision instrument designed to help insure a smooth and accurate arrow flight. As bows increase in speed, accuracy becomes more and more critical. Use of the Arrow Inspector will increase accuracy and is essential when gluing outserts/ point adapters on carbon fiber arrows. The Arrow InspectorTM will check, with precise accuracy, arrow shaft straightness, broadhead balance and straightness, nock alignment and vane and feather balance. The Arrow InspectorTM features low friction machine cut steel axles and precision cut aluminum wheels - to detect even the slightest bend in an arrow shaft or unbalanced arrow. This tool is essential when gluing hidden inserts, outserts and nocks on carbon fiber arrows after applying epoxy so they can be easily aligned for perfect balance every time.
The LCA Draw Board is the perfect tool for tuning your bow to perfection. Check your timing, draw length, cam lean, and set your rest with more precision than ever. You can mount the LCA Draw Board to your workbench / table or you can install the unit onto your LCA bow press.
- Leveling value package! - Includes Freehand Bow Level & Freehand Arrow Level
Vertical fletching jig from Avalon.
Axis Sight Leveler universally assists in tuning sight bars and scopes for precision adjustment of the 1st, 2nd, and 3rd sight axis. Guarantee perfect level by using with a Versa-Cradle Bow Vice. The 6,000 series machined aluminum slight leveler is custom fit to seamlessly integrate with any Versa-Cradle clamp. For those without a Versa-cradle, the flat surface of the sight leveler accommodates any C-Clamp. The three set screws allow for easy adjustment to bring your sight to level status before making axis adjustments.
Vanes remover with plastic handle that helps use it with maximum comfort. The curve blade allows for an easier removal and is hidden by a plastic cap when not in use.
Beiter Limb Line Gauges are a simple and effective precision tool for the tuning of the bows.With the aid of Beiter Limb Line Gauges you can check the arrow position on the bow and in respect of the position of the Sight Tunnel and the limbs, the so-called center-shot. You can determine: - The arrow position in the bow-window. - The center-shot, that means the correspondance of the arrow position in respect of the position of the sight tunnel and the limbs. - The position and straightness of the limbs. - The alignment of the limbs with the handle. - Beiter Limb Line Gauges are definetly an indispensable tool for every archer!
The Revolution Arrow Tuner is the first tool of its kind.
The Limb Lock Kit is a perfect addition to any LCA bow press and is designed specifically for pressing beyond parallel limb bows.
The Power Green Crossbow is designed for quick and easy set-up of most crossbows. This press is perfect for both home and shop use, and it's effortless to use. Each LCA press model is equipped with the LCA patented finger system that allows you to press your bow precisely as if it's being drawn back. While pressing your bow, you're not applying any extra pressure to your limbs, and you're also not applying torque to your riser. The Power Green Crossbow moves in and out using a powered motor for fast and smooth movement. This particular press model has a range that spans from 11" - 32" axle to axle length. Any LCA press that's crossbow compatible uses a much thicker grade material so that the press itself is strong enough to handle high poundage crossbows.
No more guessing or clipping/unclipping your bow square to ensure the loop is in the correct place!
The LCA Bow Scale 3.0 is a newly designed scale used primarily for archery equipment.
The HS4 is a newly designed scale used primarily for archery equipment.
The AroJac is now smaller, more compact, and lighter weight than the previous design.
The OMP Phoenix Fletching Jig is constructed out of rugged die-cast and machined aluminum materials for ultimate durability.
Caractéristiques
Notes complémentaires
Pincez pour fixer... réglez, rangez l'outil dans sa housse de protection jusqu'à la prochaine utilisation.
COMPOUND : le CLIP 3D se fixe sur la poignée d'arc et/ou sur le viseur (la corde d'un arc à poulies n'est pas toujours verticale). Ajustez la verticalité de la réglette, puis les axes de votre tête de viseur.
Réglez le niveau de bulle de scope : cela supprime le latéral entre deux distances éloignées l'une de l'autre, et dans les pentes lors de tir de parcours (si bien sûr vous êtes au point niveau spine de flèche et réglage de Center-Shot ;-))
RECURVE : le CLIP 3D se fixe sur la corde pour placer votre arc classique verticalement. Puis clipez-le sur votre viseur pour ajuster la verticalité de la réglette.
Ce paramètre supprime le latéral entre deux distances éloignées l'une de l'autre (si bien sûr vous êtes au point niveau spine de flèche et réglage de berger ;-))
