encoches

Bohning's Smooth Release Pin Nock was redesigned in 2019 to fit a broader range of pin sizes - redesigned nocks are easily identified as they are marked with the Bohning logo. The Smooth Release Pin Nock features a raised index, short ears and a smooth throat for a clean release. Each nock weighs an average of 5.0 grains (324 mg). Its .120" (3.05mm) throat size is designed to fit larger diameter bowstrings typically used by compound shooters. Not sure which Bohning Pin Nock you have? The Smooth Release Pin Nock is marked with the letter "M" for easy identification. Tech tip: for easier insertion and indexing, apply a small amount of Bohning's Tex-Tite or Seal-Tite wax to the pin.

The standard wooden nock by Tipping Point was developed as a result of the need to have a nock that can be easily installed.

• The shafts must first be correctly prepared with the conical end using the special Tipping Point sharpener, which creates the right inclination for insertion into the nocks.
• The nocks are made of hornbeam wood, which is known for its high resistance.
• Available in 5/16, 11/32 & 9/32.

The slim wooden nock by Tipping Point was developed as a result of the need to have a nock that can be easily installed.

• The shafts must first be correctly prepared with the conical end using the special Tipping Point sharpener, which creates the right inclination for insertion into the nocks.
• The nocks are made of hornbeam wood, which is known for its high resistance.
• The final part of the nock is milled on both sides to improve the profile of the nock.
• Available in 5/16 & 11/32.