Material: 40-TON Carbon - ID: 3.2mm / .166" - Straightness tolerance: .006"

 Material: 40-TON Carbon - ID: 3.2mm / .166" - Straightness tolerance: .004"

Material: 40-TON Carbon - ID: 3.2mm / .125" - Straightness tolerance: .0015"

A first-class 40-ton all-carbon shaft with a straightness tolerance of ±.001". Streamlined with a small diameter ID 3.2 for less drag in the wind. This makes the Skylon Preminens the ultimate arrow for recurve and compound archery. - Micro diameter, less wind drift - high density carbon construction - Material: 40-TON Carbon - Inner Diameter: 3.2mm / .125" - Straightness Tolerance: ±.001"

 NOVICE ID4.2 600 / 31" LENGTH / EP23 VANES / NOCK SML / 90GR POINT 24/PK  Material: 24-TON Carbon - ID: 4.2mm / .166" - Straightness Tolerance: .007"

 EP 23 / PIN NOCK / 100-120GR BREAK-OFF POINT NOT GLUED IN 12/PK Material: 24-TON Carbon - ID: 4.2mm / .166" - Straightness Tolerance: .005"

RADIUS ID4.2 / PIN INCLUDED 12/PK

Material: 24-TON Carbon - ID: 4.2mm / .166" - Straightness tolerance: .005"

- Material: 24-TON Carbon - ID: 4.2mm / .166" - Straightness tolerance: .0015"

INSTEC ID5.2  / 33" BLAZER VANE / IN-NOCK / INSERT 12/PK  Material: 24-TON Carbon - ID: 5.2mm / .204" - Straightness Tolerance: .006"

INSTEC ID5.2  / 33" BLAZER VANE / IN-NOCK / INSERT 12/PK Material: 24-TON Carbon - ID: 5.2mm / .204" - Straightness Tolerance: .006"

Material: 24-TON Carbon - ID: 5.2mm / .204" - Straightness tolerance: .003"

QUANTIC ID5.2 / 33" BLAZER VANE / IN-NOCK / INSERT 12/PK Material: 24-TON 3K Carbon - ID: 5.2mm / 0.204" - Straightness Tolerance: .003"

 EBONY ID5.2 / 33" FEATHER 4" / IN-NOCK / INSERT 12/PK 

EBONY ID5.2 / 33" WITH IN-NOCK AND INSERT 12/PK - Material: 24-TON Carbon - ID: 5.2mm / .204" - Straightness tolerance: .006"

 CARBON 3K BACKBONE ID5.2 / 33" FEATHER 4" / IN-NOCK / INSERT 12/PK

CARBON 3K BACKBONE ID5.2 / 33" WITH INSIDE NOCK AND INSERT 12/PK

SAVAGE ID6.2 350 - 30" BLAZER VANE/IN-NOCK/INSERT/POINT  Material: 24-TON Carbon - ID: 6.2mm / .244" - Straightness Tolerance: .006"

EDGE ID6.2 / 33" BLAZER VANE / IN-NOCK / INSERT 12/PK

 EDGE ID6.2  / 33" MET IN-NOCK EN INSERT 12/PK Material: 24-TON Carbon - ID: 6.2mm / .244" - Straightness tolerance: .005"

CARBON PHORIC ID6.2 350 / 33" BLAZER VANE / COMPOUND PIN NOCK / INSERT 12/Pk

 FRONTIER ID6.2 / 33" FEATHER 4" / IN-NOCK / INSERT 12/PK 

FRONTIER ID6.2 400 / 33" WITH IN-NOCK AND INSERT 12/PK

BENTWOOD ID6.2 / 33" WITH IN-NOCK AND INSERT 12/PK Material: 24-TON Carbon - ID: 6.2mm / .244" - Straightness tolerance: .005"

BENTWOOD ID6.2  / 33" FEATHER 4" / IN-NOCK / INSERT 12/PK

• Material: 24-TON Carbon
• ID: 6.2mm / .244”
• Straightness Tolerance: .003"

ROVE ID6.2  MET IN-NOCK EN INSERT 12/PK - Material: 24-TON Carbon - ID: 6.2mm / .244" - Straightness tolerance: .003"

 ROVE ID6.2 BLAZER VANE / IN-NOCK / INSERT 12/PK Material: 24-TON Carbon - ID: 6.2mm / .244" - Straightness Tolerance: .003"

fin de serie , il nous reste quelle spine de disponible 

fin de serie  , il nous reste quell spine de disponible

The ultimate recurve competition shaft. The Easton X10 has won more World and Olympic titles than any other arrow- or any other archery product of any kind- since its competition debut at the 1996 Olympic Games in Atlanta, USA. Since making that gold-medal-winning debut, it has gone on to be used to win every single Olympic Medal since the Atlanta Games. High-modulus carbon fiber on a precision, thin-wall aluminum core creates an unmatched synergy of precision and durability. With components engineered to match the performance of this ultimate target shaft, every size X10 features a custom barreled design, providing the ultimate in clearance, finger release forgiveness, and the correct frequency match for modern recurve bows. - High-strength carbon fiber bonded to a 7075 precision alloy core - Polished 9-micron carbon finish - Straightness: ± .0015” - Weight tolerance: ± 0.5 grains per packaged dozen - Weight coded for precision matching between dozens - Barreled design

Elevate your archery game with the X10 4mm Parallel Pro.

• High-strength carbon fiber bonded to a 7075 alloy core.
• Straightness: ± .001”
• Weight tolerance: ± 0.5 grains in precise weight codes
• Parallel profile

Since its introduction, the compound-specific X10 Protour has won more titles and set more records for compound archers than all other choices combined. Specifically engineered for compound target competition, Protour features a front taper allowing for every size to use Easton X10 point components- the same components that have been used to win every Olympic medal since 1996. The precisely engineered mass to spine ratio of each Procomp size ensures the best ballistic performance at longer compound competition distances, and gives archers an undeniable edge in unpredictable windy weather. With unmatched precision and legendary durability in even the most abusive target materials on the world circuit, Procomp is at the absolute performance pinnacle for compound target precision. - Lightweight, high-modulus carbon fiber bonded to a precision 7075 alloy core - Polished black carbon finish - Straightness ± .0015″ - Weight tolerance: ± 0.5 grains - Tapered design

The Superdrive Micro is Easton’s highest performing all-carbon arrow designed for all-purpose outdoor tournament use from target to field to 3D.

• Engineered to provide the lightest grain-per-inch weights possible in a given spine range, the Superdrive Micro will maximize your shooting range and minimize your pin gaps, allowing for higher velocities both out of the bow and tighter gaps downrange.
• Multi-layer wrapped 100% carbon-fiber construction.
• 4mm parallel design.
• Specifically engineered for outdoor competition.
• Weight Tolerance: +/- 1.0 grain
• Straightness +/- .002”

Easton’s new Avance and Avance Sport 4MM arrows are an all-carbon target arrow intended to fit in the middle of the outdoor target archery market. Avance and Avance Sport share the same carbon construction and are then sorted into by straightness. The Avance has a +/- .003” straightness, ideal for intermediate level archers; and the Avance Sport carries a +/- .006” straight spec, ideal for novice level archers looking for lightweight performance in a less expensive arrow. The Avance series is available in a wide selection of spine sizes that cover tuning ranges for recurve and compound archers over a broad range of bow styles, draw lengths and poundages. The durable, all-carbon construction of the Avance nets an arrow that is lighter than previous Easton offerings, allowing for top level performance and greatly benefiting the entry-level to intermediate-level target archer. Accompanying the Avance is a full line of glue-in target points, pin inserts, pin nocks and push in nocks.

Easton’s new Avance and Avance Sport 4MM arrows are an all-carbon target arrow intended to fit in the middle of the outdoor target archery market. Avance and Avance Sport share the same carbon construction and are then sorted into by straightness.The The Avance has a +/- .003” straightness, ideal for intermediate level archers; and the Avance Sport carries a +/- .006” straight spec, ideal for novice level archers looking for lightweight performance in a less expensive arrow. The Avance series is available in a wide selection of spine sizes that cover tuning ranges for recurve and compound archers over a broad range of bow styles, draw lengths and poundages. The durable, all-carbon construction of the Avance nets an arrow that is lighter than previous Easton offerings, allowing for top level performance and greatly benefiting the entry-level to intermediate-level target archer. Accompanying the Avance is a full line of glue-in target points, pin inserts, pin nocks and push in nocks.

The 4MM FMJ offers the most penetration and is precision-made in USA for the most accurate hunting arrow on the market. The 4MM Full Metal Jacket has been updated with a new spine configuration, an all-new 8-32 point outsert system, and a redesigned graphics. The standard 8-32 thread point outsert optimizes front-of-center for easier broadhead tuning and more durability. FMJ starts with an advanced carbon core foundation for lightweight strength. A full metal jacket adds kinetic energy, accuracy, and pulls easier from targets. The combination provides the deepest penetration and more pass-through impacts for quicker kills and heavier blood trails. - 4mm Micro- Diameter carbon core with 7075 alloy jacket - Pre-installed 4mm Nocks - 4mm Aluminum Point Outsert (50 grains) Included - Easy target Pull - Straightness +/- .003”

The 4MM FMJ offers the most penetration and is precision-made in USA for the most accurate hunting arrow on the market. The 4MM Full Metal Jacket has been updated with a new spine configuration, an all-new 8-32 point outsert system, and a redesigned graphics. The standard 8-32 thread point outsert optimizes front-of-center for easier broadhead tuning and more durability. FMJ starts with an advanced carbon core foundation for lightweight strength. A full metal jacket adds kinetic energy, enhances accuracy, and pulls easier from targets. The combination provides the deepest penetration and more pass-through impacts for quicker kills and heavier blood trails. - 4mm Micro- Diameter carbon core with 7075 alloy jacket - Pre-installed 4mm Nocks - 4mm Aluminum Point Outsert (50 grains) Included - Easy target Pull - Straightness .001” Match Grade version

Industry-leading carbon AXIS now available in a 4MM micro-diameter. The AXIS 4MM Long Range is engineered with a specific 100% carbon-fiber layup for increased velocity. Includes Easton’s new Aluminum point outsert to boost both strength and front-of-center accuracy at long range and comes pre-installed with 4MM nocks. - Micro-Diameter, 100% carbon hunting arrow- increased velocity - Reduced friction in flight and at impact to offer optimized FOC, enhance target penetration, and better accuracy at long range - Includes NEW aluminum point outserts; 4MM nocks pre-installed - Straightness: +/- .003″

Go fast or go heavy!

• The Easton Sonic 6.0 is a 6mm high-performance hunting arrow engineered with high-performance speed and hunting accuracy in mind.
• The Sonic 6.0 is built from scratch in the USA using Easton’s seamless Acu-Carbon process for 100% weight and spine consistency from shaft to shaft and from dozen to dozen.
• Lighter overall mass weight also provides for a wider-range of arrow build options; from light-weight speed setups to high-FOC/high-momentum heavyweights.
• Pre-installed 6mm nocks
• Straightness +/- .003”

Hunting accuracy for shooter confidence is the cornerstone of Easton 6.5 arrows. The 6.5 uses proprietary Acu-Carbon™Uniform Spine process. Acu-Carbon™ is a continuous-fed, single-die manufacturing method that results in the most reliable tolerances and eliminates the need for the spine-alignment and weight sorting. Easton’s Acu-Carbon™ production line produces the most consistent spine and weight from dozen to dozen and lot to lot—year in and year out. This benefits the bowhunter with truer flight and pinpoint accuracy in the field. The Easton 6.5MM™ arrows are USA-made shafts that offer the highest level of accuracy available to bowhunters today all at price points to fit virtually any budget. The Easton 6.5 includes NEW 6.5MM inserts that are made using a 4X-larger shoulder to add strength and boost valuable FOC.

Hunting accuracy for shooter confidence is the cornerstone of Easton 6.5 arrows. The 6.5 uses proprietary Acu-Carbon™Uniform Spine process. Acu-Carbon™ is a continuous-fed, single-die manufacturing method that results in the most reliable tolerances and eliminates the need for the spine-alignment and weight sorting. Easton’s Acu-Carbon™ production line produces the most consistent spine and weight from dozen to dozen and lot to lot—year in and year out. This benefits the bowhunter with truer flight and pinpoint accuracy in the field. The Easton 6.5MM™ arrows are USA-made shafts that offer the highest level of accuracy available to bowhunters today all at price points to fit virtually any budget. The Easton 6.5 includes NEW 6.5MM inserts that are made using a 4X-larger shoulder to add strength and boost valuable FOC.

Easton’s 6.5MM Whiteout is the next evolution in hunting arrow aesthetics. With an all-white exterior finish and USA-Made uniform ACU Carbon construction, Whiteout offers high-visibility in flight and provides a blood indicator for shot-placement identification. - High-visibility arrow for quick shot identification - +/- .003” straightness - Made in USA with Easton Acu-Carbon™ process

The Easton Carbon Legacy combines the traditional look of wood-grained carbon with high-visibility white-dipped and hand-feather fletched craftsmanship.

• Offers the finest vintage aesthetic in a highly effective hunting carbon arrow.
• Pre-installed with 6.5MM 3D Super Nocks and aluminum inserts included.
• Constructed of high-quality carbon fiber, Legacy pays tribute to the history of our sport in a realistic wood grain finish with a white-crested nock.
• .244” ID standard-diameter carbon-fiber construction.
• RPS aluminum inserts included.
• Straightness ±.005”

Celebrating Easton’s 100 years in archery, the 5MM Autumn Orange FMJ is a fresh take on an old favorite.

• Finished with the classic Easton Autumn Orange anodize, this limited edition offering gives archers a modern arrow with throwback nostalgia to the arrows they may have put in their first quiver.
• 5mm HIT 8-32 inserts included (16 grain)
• 5mm small-diameter carbon-core with 7075-alloy metal jacket FMJ Construction
• Pre-installed 5mm (X) nocks
• Easy target pull 
• Easy to find orange anodized finish
• Straightness +/- .002”
• Made in USA

Easton’s Vector is a 4mm 100% carbon-fiber arrow engineered using the same high-performance processes used in advanced tournament arrows, but priced for value conscious consumers.

• Multi-layer wrapped 100% carbon-fiber construction.
• 4mm parallel design.
• Straightness checked.
• Weight matched.
• The Vector is ideal for archers who may be getting started in target archery or quickly progressing to higher poundage bows and needing to change arrow setups to match.

A/C/E is the arrow which started a revolution that continues to this day. Light, strong and proven across the globe. - High-strength carbon fiber bonded to a 7075 alloy core - Polished black carbon finish - Straightness: ± .0015” - Weight tolerance: ± 0.5 grains - Barreled design