amortisseurs de stabilisations

Our damper stabilizers is not a typical damper device. We thought as a complex piece for solve two questions respect the bow vibrations. Two types of vibrations was produced after the shoot, the first produced by the general movement that the archery impulse in the shoot execution pulling the bow, the second was produced for the impact of the string to the limbs, that is going onto the stabilizer. Our design is the most advanced on the market. Why? The inner core is the heart of the FlexBall, designed for the vibrations transmitted onto the stabilizer, always protected of the external conditions, always working. The outside is the skin of the FlexBall, looking for eat the mayor movements during the shot execution and protecting the FlexBall inner core of he external conditions. The result it´s the FlexBall 2.0 the most advanced damper till today. 1/4 x 1/4 threads fits stabilizers with 1/4 thread, between the weights and the stabilizer end.

The Enhancer is used on the end of the front bar to offer vibration damping as well as a soft feel when placing the bar on the ground.

Upgrade any target stabilizer to a dynamic stabilizer with the Target Stabilizer Dampener. It boosts performance by minimizing whip and vibration in the stabilizer.

The Target Stabilizer Dampener cuts out much of the unwanted hand shock and noise for a smoother shot. It also reduces stabilizer wobble to decrease stress on the archer. It is designed to be positionable on most stabilizers to maximize performance tuning.

Two sizes are available to fit a wide range of stabilizers. The standard size fits stabilizers with diameter ranging from .5" up to .75"

Wiawis Multi damper is designed to reduce vibration quickly caused by shocks during shooting and to reduce secondary vibrations after shooting from special material and strength of the damper. It is also designed to be used with various types of bows such as up, long and short stabilizer and weight control dampers under the grip by using the screws of 1/4-20 and 5/16-24. The damper is available not only for recurve bow, but also for compound bow. - Length: 38mm - Weight: 48g

BW dampers are made from an absorbent rubber material that nearly eliminates vibration during shooting and controls poor movement in equipment after the shot. - Length: 25mm - Weight: 32.5g

After much research and development by the Win&Win team on the shape and lenght of vibration waves with stabilizers, Win&Win has released their Wiawis ACS Damper. The ACS Damper is far superior in absorbing vibration. - Length: 50mm - Weight: 33g

The new S-LONG Damper is made to be used on the riser to controldampering and absorbing vibrations better.

- Diameter : 1.5" - Thread : 5/16" - Reduces noises and vibrations - Anodized - Threads on 5/16" riser

- Diameter: 29mm (base 22mm) - Thread: 1/4" - Reduces noises and vibrations - Easy to install - Threads on any stabilizer with 1/4" ends

- 31.5mm diameter end weight damper - 1/4" UNC thread - Use the 25mm long damper for up to 4 weights

5/16" connection
Thread for weights: 1/4"

Base thread 1/4"
Upper thread 1/4" 

Vibration damper made of rubber with threaded insert in 5/16" and threaded pin from 1/4!" to 5/16". Due to the long thread in 5/16", the threaded pin can also be screwed with the thin side inwards in order to get to 5/16" on both sides.

Dimensions: L 38mm, maximum diameter 35mm and diameter at ends 25mm.

Length of threaded pin: approx. 13 mm 5/16" and 8 mm 1/4" thread. 

• Clear Flexible vibration damper
• Threaded hole ¼ UNC from both sides and through
• It can be made stiffer by inserting a set screw inside
• Available stiffness 50 shore

Amortisseur de vibrations de grandes dimensions et rigidité, utilisable à l'extrémité de tout stabilisateur avec filetage 5/16". Utilisable avec un grand nombre de poids (dans l'image sont utilisés 10 poids de 28gr chacun). L'amortissuer est excellent et empéche la pointe du stabilisateur de se plier. 

Vibration dampener made of premium silicon material. Reinforced rib designed body for maximum vibration absorbing capability.

Specification

• Weight:90g
• Length: 5” (1/4-20 thread)
• Available in: Black (BK), Blue (BL) and Red (RD)

The De-Resonator allows archers to cancel much of the resonant vibration that occurs in some bow set-ups.

The Enhancer is used on the end of the front bar to offer vibration damping as well as a soft feel when placing the bar on the ground.

The Orbit Dampener can be strategically placed to offset the weight caused by the addition of accessories, while reducing unwanted vibration. - Can be stacked and strategically placed to add as much, or as little weight as needed.

- Superior vibration dampening in all axes... X,Y, & Z - Strong proprietary rubber material supports up to 30oz. weights - 1-5oz. weights, loosen counter - clockwise all the way to stop - 5-10oz. weights, tighten clockwise 1 revolution - 10-30oz. weights, tightest clockwise setting 2 revolutions - Overall weight: 2.7oz

3.5 OZ. Weight with 5/16" thread complete with vibration dampers available in various colours.

Can be used as a stabilising weight or attached directly to the bow.

Available in:

• BK: Black
• BL: Blue
• GR: Green
• PK: Pink
• PR: Purple
• YL: Yellow 

La version COLOR M8 est rigide et légère (62g / 2oz), outre l'aspect visuel personnalisant votre arc et ses accessoires, sa rigidité lui permet de gagner en nervosité sur chaque extrémité de stabilisateur.

Livrée avec les quatre souplesses de membranes , six vis de montage et six rondelles en acier inoxydable.

La V-BOX M8 est compatible avec l'ensemble de nos stabilisateurs filetés en M8 à leur extrémité (côté masses), avec les vis M8 et avec nos masses HW.

Coques en Aluminium anodisées (5 couleurs disponibles)

Uniquement en filetage métrique M8 pour stabilisations ARC SYSTEME.

(Pour les filetages 5/16e-24, consultez votre magasin pour obtenir une BEITER VBOX et ses pièces détachées auprès de la marque BEITER).

Coques en Inox

Uniquement en filetage métrique M8 pour stabilisations ARC SYSTEME.

(Pour les filetages 5/16e-24, consultez votre magasin pour obtenir une BEITER VBOX et ses pièces détachées auprès de la marque BEITER).

Poids : 130 grammes.

Poids total une fois montées en VBOX STEEL : 145 grammes.

La version STEEL M8 est rigide et lourde (145g / 5oz), elle permet de gagner en densité sur la masse embarquée sur chaque extrémité de stabilisateur.

Livrée avec les quatre souplesses de membranes , six vis de montage et six rondelles en acier inoxydable.

La V-BOX M8 est compatible avec l'ensemble de nos stabilisateurs filetés en M8 à leur extrémité (côté masses), avec les vis M8 et avec nos masses HW.

La version V-BOX ORIGINALE est souple et légère (49g / 2oz) pour offrir un bon amorti dès les premières masses connectées à son extrémité.

Livrée avec les quatre souplesses de membranes , six vis de montage et six rondelles plastiques.

La V-BOX M8 est compatible avec l'ensemble de nos stabilisateurs filetés en M8 à leur extrémité (côté masses), avec les vis M8 et avec nos masses HW.

Le nouvel AiM8 revisité : même forme, trois longueurs, nouvelle matière pour un amorti inégalé sur des poids légers.